Fakta om udbudet
EU-nr
2015/S 122-224052
Offentliggjort
Udbyder
Switchgear
Contract award notice – utilities
Directive 2004/17/EC
Section I: Contracting entity
I.1) Name, addresses and contact point(s)
DONG Energy Thermal Power A/S
Kraftværksvej 53
For the attention of: Martin H. Grotrian
7000 Fredericia
DENMARK
Telephone: +45 99555941
E-mail: mahgo@dongenergy.dk
Internet address(es):
General address of the contracting entity: http://www.dongenergy.com
I.2) Main activity
Production, transport and distribution of gas and heat
Electricity
Electricity
I.3) Contract award on behalf of other contracting entities
The contracting entity is purchasing on behalf of other contracting entities: no
Section II: Object of the contract
II.1) Description
II.1.1) Title attributed to the contract
SKV40 wood chips — MV switchgear.
II.1.2) Type of contract and location of works, place of delivery or of performance
Works
Main site or location of works, place of delivery or of performance: Skærbæk Thermal Power Station, Klippehagevej 22, 7000 Fredericia, Denmark.
Main site or location of works, place of delivery or of performance: Skærbæk Thermal Power Station, Klippehagevej 22, 7000 Fredericia, Denmark.
NUTS code DK042
II.1.3) Information about a framework agreement or a dynamic purchasing system (DPS)
II.1.4) Short description of the contract or purchase(s):
Dong Energy Thermal Power is planning to implement district heating production based on biofuels through erection of two wood-chip boilers, providing steam for existing steam turbine and/or stand alone district heating condenser. Two boilers as an add-on the existing gas fired plant, Skærbækverket. The new biomass fired boilers shall deliver up to 320 MW heat to the district heating system. The new boiler plant shall have a capacity of maximum 280 MW and the remaining heat shall be provided by flue gas condensers.
Medium voltage switchgear .
It is DONG Energy Thermal Power's intention to enter into a contract for the engineering, delivery, transport, installation, commissioning and performance responsibility for medium voltage switchgear based on Functional
Specifications. DONG Energy Thermal Power will elaborate technical and functional requirements to be included in the Tender material and also set up requirements for guarantees and performance.
New medium voltage switchgear are envisaged to be used for the add-on plant, destined users are transformers and other medium voltage loads, such as cranes and variable speed drives.
The switchgear equipment will be feed from existing medium voltage distribution on site. The final design of the medium voltage distribution is not set. Alternative solutions regarding the interface of the existing medium voltage distribution net are investigated, complement of existing equipment and/or installing new.
DONG Energy Thermal Power envisages prospective layout of medium voltage switchgear, existing switchgear complemented:
— Feeder >1250A (1 pcs);
— Feeder 630A (1 pcs).
Prospective layout of medium voltage switchgear, add-on plant new switchgear:
— Incomer >1250A (1 pcs);
— Incomer alternative 630A (1 pcs);
— Feeder, transformer 630A (6-8 pcs);
— Feeder, MV loads 630A (2-4 pcs).
The following values are valid for the MV grid:
— Rated Medium Voltage 3-phase, 50Hz 12,0 kV;
— Operating Medium Voltage 3-phase, 50Hz 10.5 kV;
— Nominal Medium Voltage 3-phase, 50Hz 10,0 kV;
— Standard lightning Impulse withstand voltage 75 kV peak;
— Standard short-duration power-frequency withstand voltage 28 kV rms;
— Short circuit current > 20 kA.
Electrical operating rooms will be arranged with measures to control the environment and switchgear rooms will be fitted with installation floor.
Medium voltage switchgear .
It is DONG Energy Thermal Power's intention to enter into a contract for the engineering, delivery, transport, installation, commissioning and performance responsibility for medium voltage switchgear based on Functional
Specifications. DONG Energy Thermal Power will elaborate technical and functional requirements to be included in the Tender material and also set up requirements for guarantees and performance.
New medium voltage switchgear are envisaged to be used for the add-on plant, destined users are transformers and other medium voltage loads, such as cranes and variable speed drives.
The switchgear equipment will be feed from existing medium voltage distribution on site. The final design of the medium voltage distribution is not set. Alternative solutions regarding the interface of the existing medium voltage distribution net are investigated, complement of existing equipment and/or installing new.
DONG Energy Thermal Power envisages prospective layout of medium voltage switchgear, existing switchgear complemented:
— Feeder >1250A (1 pcs);
— Feeder 630A (1 pcs).
Prospective layout of medium voltage switchgear, add-on plant new switchgear:
— Incomer >1250A (1 pcs);
— Incomer alternative 630A (1 pcs);
— Feeder, transformer 630A (6-8 pcs);
— Feeder, MV loads 630A (2-4 pcs).
The following values are valid for the MV grid:
— Rated Medium Voltage 3-phase, 50Hz 12,0 kV;
— Operating Medium Voltage 3-phase, 50Hz 10.5 kV;
— Nominal Medium Voltage 3-phase, 50Hz 10,0 kV;
— Standard lightning Impulse withstand voltage 75 kV peak;
— Standard short-duration power-frequency withstand voltage 28 kV rms;
— Short circuit current > 20 kA.
Electrical operating rooms will be arranged with measures to control the environment and switchgear rooms will be fitted with installation floor.
II.1.5) Common procurement vocabulary (CPV)
31214000, 31214520, 51112100
II.1.6) Information about Government Procurement Agreement (GPA)
The contract is covered by the Government Procurement Agreement (GPA): no
II.2) Total final value of contract(s)
II.2.1) Total final value of contract(s)
Section IV: Procedure
IV.1) Type of procedure
IV.1.1) Type of procedure
Negotiated with a call for competition
IV.2) Award criteria
IV.2.1) Award criteria
The most economically advantageous tender
IV.2.2) Information about electronic auction
An electronic auction will be used: no
IV.3) Administrative information
IV.3.1) File reference number attributed by the contracting entity:
02-B BBA
IV.3.2) Previous publication(s) concerning the same contract
Contract notice
Notice number in the OJEU: 2014/S 178-315270 of 17.9.2014
Section V: Award of contract
V.1) Award and contract value
Contract No: 1
Lot No: 1 - Lot title: SKV40 wood chips — MV switchgear
Lot No: 1 - Lot title: SKV40 wood chips — MV switchgear
V.1.1) Date of contract award decision:
17.4.2015
V.1.2) Information about offers
V.1.3) Name and address of economic operator in favour of whom the contract award decision has been taken
Schneider Electric Danmark A/S
Industriparken 32
2750 Ballerup
DENMARK
Telephone: +45 88302000
E-mail: flemming.kiilerich@schneider-electric.com
Internet address: http://www.schneider-electric.com/site/home/index.cfm/dk/
V.1.4) Information on value of contract
V.1.5) Information about subcontracting
The contract is likely to be sub-contracted: no
V.1.6) Price paid for bargain purchases
Section VI: Complementary information
VI.1) Information about European Union funds
The contract is related to a project and/or programme financed by European Union funds: no
VI.2) Additional information:
Upon written request to the contact person of the Contracting Entity a Letter of Support will be forwarded. The Contracting Entity reserves the right — subject to the principles of equal treatment and transparency — to request a Candidate to submit missing or insufficient information according to section III.2.1), III.2.2), and III.2.3) or, if applicable, to use information already in the Contracting entity's possession; or obtain such information provided it is publicly available. However the Contracting entity is not obliged to do so.
A maximum of 7 candidates will be pre-qualified for the tender procedure. If the number of Candidates applying for pre-qualification exceeds 5-7 the Contracting entity will perform the pre-qualification on the basis of the information given by each candidate on the following:
— the assessment of the Candidates economic and financial standing;
— the Candidates reference list;
— the Candidates description of the Quality, Health, Safety and Environment management systems;
— The Candidates description of the the ability to deliver service and maintenance.
Award of contract will be subject to approval by the Board and a positive Final Investment Decision.
A maximum of 7 candidates will be pre-qualified for the tender procedure. If the number of Candidates applying for pre-qualification exceeds 5-7 the Contracting entity will perform the pre-qualification on the basis of the information given by each candidate on the following:
— the assessment of the Candidates economic and financial standing;
— the Candidates reference list;
— the Candidates description of the Quality, Health, Safety and Environment management systems;
— The Candidates description of the the ability to deliver service and maintenance.
Award of contract will be subject to approval by the Board and a positive Final Investment Decision.
VI.3) Procedures for appeal
VI.3.1) Body responsible for appeal procedures
Klagenævnet for udbud
Dahlerups Pakhus, Langelinie Allé 17
2100 Copenhagen
DENMARK
E-mail: klfu@klfu.dk
Internet address: www.klfu.dk
VI.3.2) Lodging of appeals
Precise information on deadline(s) for lodging appeals: Complaints about tenders according to the General procurement directive 2004/18/EC or Utilities directive 2004/17/EC shall be filed in Klagenævnet for Udbud within 6 months after the Contracting Entity has published a notice in TED concerning award for the contract. The deadline for filing a complaint is calculated form the day after the date when the Contracting Entity has published the notice.
VI.3.3) Service from which information about the lodging of appeals may be obtained
Konkurrence og forbrugerstyrelsen
Carl Jacobsens Vej 35
2500 Valby
DENMARK
E-mail: kfst@kfst.dk
Internet address: www.kfst.dk
VI.4) Date of dispatch of this notice:
23.6.2015